Brand: VooPoo
£29.99
100 In Stock

The Drag S Pro keeps the stylish, soft leather finish and rounded, ergonomic design that the Drag Series is known for, but with some big improvements on previous models. New features include the upgraded GENE.FAN 3.0 chip, improved performance, increased battery capacity, larger clouds, more flavour and a new on/off toggle switch.

The Drag S Pro features 5 – 80W of adjustable output and is powered by a 3000mAh built-in battery. USB-C fast charging means the battery can be fully recharged in 60 minutes.

The GENE.FAN 3.0 chip gives the Drag S Pro up to 20% better overall performance than previous models and provides users with a choice of vaping modes. You can choose between Smart, RBA and Temperature Control* modes for full control over how you vape. (See more about these modes in the FAQs below.)

* Please note: Temperature Control mode must be downloaded from the Voopoo website.

The Drag S Pro kit includes the TPP X pod, which works with TPP coils for a satisfying Direct-Lung vape with large clouds and great flavour. The TPP X pod improves on the original TPP pod with the inclusion of a new 360 infinite airflow control so you can precisely tailor your air intake for a tighter or more airy vape.

For added versatility, there is also a choice of both manual and auto draw options – you can either use the fire button to fire the device or inhale on the tank to activate auto draw.

A large colour screen provides you with important data including wattage, battery life and mode options so you can monitor your device and control its settings.

COMPATIBLE COILS & E-LIQUIDS

The Voopoo TPP X pod is compatible with TPP coils and is recommended for use with high VG e-liquids with a VG:PG ratio of 70:30 or above.

RECOMMENDED WATTAGES

  • 0.15Ω TPP-DM1 Coil: 60 – 80W (Best at 65 – 75W)
  • 0.3Ω TPP-DM4 Coil: 32 – 40W (Best at 35W)

 

WHO IS THE VOOPOO DRAG S PRO KIT FOR?

The Drag S Pro is suited to vapers of all experience levels looking for a Direct-Lung vape that looks good and provides big clouds and flavour.

Newer, less experienced users can utilise Smart Mode while those with more experience can use the more advanced mode options.

FAQS

What e-liquid can you use with the Voopoo Drag S Pro kit?

When used with the included coils, the included TPP X pod is best used with high VG e-liquids with a VG:PG ratio of 70:30 or more.

What does temperature control mean?

In VW mode, the resistance of the coil can change as the coil heats up. In Temperature Control mode, you set the resistance of your coil. The mod uses the resistance of the coil to detect any change in temperature. The mod will adjust or maintain power to keep consistency in resistance, and therefore temperature. This leads to a more consistent flavour profile and can also extend the life of the coil.

What is Smart Mode?

The Smart Mode feature varies from device to device, but in most cases Smart Mode is an intuitive feature that takes the guesswork out of controlling the power of devices and prevents the coil from burning out prematurely.

Usually, Smart Mode will detect the resistance of the coil being used and will either set the device’s output to the recommended wattage, suggest a wattage or restrict the wattage range you can choose accordingly.

How do I switch modes on my Drag S Pro?

To switch between vaping modes, press the + and – buttons on the Drag S Pro to enter mode settings.

How long does the Drag S Pro take to charge?

Your Drag S Pro should reach full charge in 1 hour when using the included cable.

Can I charge my Drag S Pro overnight?

Lithium batteries should not be left unattended when charging. It is also important to use an appropriate charger.

Can you wash a TPP X pod?

Yes. Remove the pod from the device, remove the coil and empty out any e-liquid. Wash the pod out with warm (not boiling) water and ensure that it is fully dry before using it again. You can also clean the connections out with cotton to remove dust.

How long do the coils last?

Coil life depends on many factors, including how long you puff for, the e-liquid you use and the wattage you use your coil at. Low resistance coils, which are used at higher wattages, will not last as long as high resistance coils.

You can extend coil life by:

  • Priming the coils before use
  • Using e-liquid with the right VG:PG ratios
  • Not going above the recommended wattage
  • Topping up your pod so that the coil never dries out

 

With care, the included TPP coils should last several days before needing to be replaced.

PROTECTIONS

  • Overtime
  • Short Circuit
  • Overcharge
  • Max Power
  • Output Over Current
  • Over Discharge
  • Over Temperature

 

SPECS

  • Power Output: 5 – 80W
  • Battery: 3000mAh
  • Mod Material: Alloy & Leather
  • Output Voltage: 0 – 8.5V
  • Resistance Range: 0.1 – 3.0Ω
  • Pod Capacity: 2ml
  • Pod Material: Stainless Steel & PCTG
  • VooPoo
  • Basalt Gray, California Orange, Classic Black, Sahara Brown, Sapphire Blue
Royal Mail Tracked Shipping

Estimated delivery time: 3-5 days (not guaranteed - please allow up to 10 days)
Same day dispatch Monday to Friday orders placed before 4.00pm. (Excluding Bank holidays)

*Royal Mail aim to deliver all Tracked 24 packages the next day, some remote areas may take longer.

£1.99
FREE on orders over £30